boost the little ones

hi everyone, the smaller mills could use a boost in the amperage end of things, most are lower output 8-15 amp and on the edge of even being a usable stand alone system, more of a small battery charger for the shed. the output can be raised 10-20% with a simple mod. this mod is from { toppentech.com } you will need to separate the connection at the stator were the three wires for the star connection is, attach a new wire to each and run them out with the original three wires. you will have to identify each coils wires and separate .re assemble the p.m.a. . the new six wire pma wires will all go to three small rectifiers, single phase one,s . the positive wire WILL be the original wires and the negative WILL be the new wires added . one rectifier for each phase, you will be adding a 60v 4700uf capasitor across the positive and negative poles of the rectifiers. the END wires will be the new pos/neg as per the rectifiers poles. this works well every time on all units tested to date, output has increased every time. im working on a system like this for the large output hawt type units, at this time I have burnt several parts and the system is not the same as size and output increases but am moving forward . as of now the lower end of power cut in has been lowered 22% but as production increases the system at present fails the amperage ability. work will continue, I will get this working, its free amperage and I want it. if you decide to try this go to toppentech for the fine details, he really is thorough in his explinations. thanks for reading.